How To Set Up My Brother Printer To Wifi

1. Get together these settings for your wireless network:

SSID (Network Name)

The name of your Wireless Network or Access Bespeak.

Network Key

The Security Cardinal, Encryption Key, WEP Key, Passphrase or password to connect to your network.

- Click here for video instructions.

Note If you're non sure virtually any of these settings, nosotros may be able to help you find them. Click here for aid.

two. Have you previously ready your Brother automobile with a wireless network connection?

- Yes: Reset your machine's network carte du jour. Click here for instructions.

- No: Become to step 3.

3. Starting time the wireless Setup Magician.

a. PressSettings on the machine .

b. Press ▲ or ▼ to displayNetwork and then press OK .

c. Press ▲ or ▼ to display WLAN and so printing OK .

d. Press ▲ or ▼ to display Setup Wizard and then press OK .

4. If Enable WLAN ? is displayed, press OK. Your car will search for and brandish a list of available networks.

Note If your network is prepare to hide the network name, then it will not announced in the list. Click below for instructions on how to manually add your network proper name.

Add your network proper noun

a. In addition to the settings from footstep 1, you'll also demand to know the following data about your network:

*The Brother machine merely supports WPA2-PSK with AES. If you're using WPA2-PSK with TKIP you will receive a connexion mistake.

Note If you're not sure well-nigh whatsoever of these settings, nosotros may be able to assistance you lot notice them. Click here for assist.

b. Press ▲ or ▼ to display <New SSID> , and then press OK.

c. Enter your network name and and then press OK. The network name must exactly match the settings on your router.

Note Clickhere for help with how to enter text on your motorcar.

d. Printing ▲ or ▼ to display Infrastructure and then press OK.

east. Press ▲ or ▼ to select one of these Hallmark Methods and then printing OK:

- If y'all chose Open System, get to step f.

- If you chose Shared Key, go to pace 1000.

- If you lot chose WPA/WPA2-PSK, go to step i.

f. Press ▲ or ▼ to select 1 of these Encryption Types and and then press OK:

- If you chose None, get to footstep 7.

- If you lot chose WEP, go to stride 1000.

g. Press ▲ or ▼ to select KEY 1 then printing OK .

h. Enter the WEP fundamental and and so press OK. Go to step vii.

Note If you immediately receive a bulletin stating "Wrong Password", then yous have entered the wrong Authentication Method, Encryption Blazon or network key. Verify your network's security settings and try again.

i. Press ▲ or ▼ to select your Encryption Type: TKIP or AES and so press OK.

j. Enter the WPA key and and so press OK. Become to step 7.

5. Printing ▲ or ▼ to brandish your network proper name and then printing OK.

Note If your network has an Open up Organisation and does not utilise a network key, then the machine will now try to connect. Go to step vii.

half dozen. When prompted, enter your network central and so press OK.

Note Clickhere for help with how to enter text on your machine.

7.If prompted, pressane (Yes) to apply your settings.

- If Connected is displayed on the LCD, then the connection was successful. Press OK and then go to pace 8.

     - If Wrong Network Fundamental is displayed on the LCD, then the password or security settings that you entered don't match your wireless network's settings. Press OK. Clickhere for helpful troubleshooting steps to assistance fix this.

     - If Connexion Fail is displayed on the LCD, then your automobile did not successfully connect to your network. Press OK. Clickhere for helpful troubleshooting steps to help gear up this.

Note The Brother automobile only supports WPAii-PSK with AES.  If your network uses WPAtwo-PSK with TKIP you lot'll receive the "Connection Fail" error.  You lot may also receive this mistake if you manually enter the wrong Authentication or Encryption method.

8. Wait about a minute and and then print the Network Configuration report to verify that your Brother car has acquired a valid IP address from your router. Click here for instructions.

9. Is the IP Address listed on the report valid for your network?

Note An invalid IP address would exist all zeroes, an APIPA address (169.254.x.x) on an Infrastructure network, or an address within an wrong range for your network.

- Yep: Your machine is at present successfully connected to your network. You may now install the software or use the Brother iPrint&Scan mobile app.

- No: We'll try to help you prepare the wireless connection. Clickhere for helpful troubleshooting steps.

Entering text

You can press ◄ or ► to motion the cursor left or right.

Most keypad buttons have several letters printed on them. Past pressing the correct number cardinal repeatedly, you lot can select the character that you want. Make sure you select the correct case of any alphabetic character that you want.

Entering Text

Inserting spaces

- To enter a infinite in a name, press ► twice between characters.

Making corrections - Press ◄ or ► to movement the cursor nether the incorrect character and and so press Clear . You may too insert a character.

Repeating characters - If you need to enter a character that is on the same key as the character earlier, press ► once to move the cursor to the right a single space and and so press the key again to enter the grapheme. Special characters - Some special characters can be accessed using the keys below. Press * , # or 0 repeatedly until you see the special grapheme or symbol that you want.

Entering Text

Troubleshooting

T1. Cycle the ability to your router to reestablish communication. Turn off the power to your router for nigh fifteen seconds then plow it back on.

This will temporarily disconnect whatsoever devices that are connected. If you lot take VOIP, whatsoever current calls volition be disconnected.

Once the router powers back on, wait near a minute and and so print the Network Configuration written report. Click hither for instructions.

T2. Is the IP Address listed on the report valid for your network?

Note An invalid IP address would be all zeroes, an APIPA accost (169.254.x.x) on an Infrastructure network, or an address within an wrong range for your network.

- Yes: Your machine is successfully connected to your network. Yous may now install the software or use the Blood brother iPrint&Browse mobile app.

- No: Go to

step T3.

T3. Verify the wireless security settings for your network. They may take been entered incorrectly.

Note If y'all're not sure nigh whatever of these settings, we may exist able to help you find them. Click here for help.

T4. If you're however unable to connect after verifying your wireless security settings, contact your router manufacturer for help with your network. Nosotros recommend yous check these settings:

- Verify the wireless security settings on the router's configuration menu match what y'all've been using. The data printed on the outside of the router may non exist correct.

- Make sure that your router is not configured to use WPA2-PSK with TKIP. Your Brother automobile does not support this combination of Hallmark and Encryption. However, it does support WPA2-PSK with AES.

- Verify that DHCP is enabled on your router so that it will automatically assign an IP address to your Blood brother auto.

- If you're using MAC Address filtering, make sure that it'southward configured to let your Blood brother auto to communicate.